Wireless, synchronous Vibration and Oscillation Measurement
TEDIASENS SN-I is a small and specialized version of the TEDIASENS SN-X radio module. «SN» stands for «Sensor Node». By avoiding cables as well as an internal industrial 3D accelerometer, numerous measurement tasks in the field of vibration and oscillation analysis can be solved without much installation effort. The industrial acceleration sensors have a measurement range of ± 10 g to ± 100 g and a measurement accuracy of 2 mg (RMS) over the bandwidth of DC or 1 Hz to 8 kHz (-3dB). The signals are sampled with a dynamic of 24 bit and a maximum frequency of 13 kHz. Application of SN-I: wireless synchronous vibration measurement, wireless oscillation measurement, acceleration measurement. Impact tests.
Product Types – Wireless, synchronous Vibration and Oscillation Measurement
TEDIASENS SN-I
|
 |
TEDIASENS SN-I-ECOIdentical to TEDIASENS (above), however:
|
|
Technical Data – Wireless, synchronous Vibration and Oscillation Measurement
| Sensor-Node with internal acceleration sensor | SN-I |
| Type of Radio Node | Sensor node with internal sensor technology |
| Radio Interface | WLAN |
| Monitoring Type | Continuously |
| External Measurement Channels | None |
| Integrated measurement channels | 3 Acceleration sensors per node |
| Integrated sensor technology | Acceleration |
| Measurement Range | ±10 g (optional: ±100 g) |
| Measurement Accuracy | 2 mg (RMS) [at ±100g -> 5 mg] |
| Sensor connection / interfaces external channels | – |
| Input Coupling | – |
| Bandwidth | 1 Hz – 8 kHz (-3dB) |
| AD converter resolution | 24bit |
| Sampling rate / data acquisition | max. 13 kHz per channel |
| SNR | 109,5dB (RMS, broadband) |
| Channel Sampling | Simultaneously |
| Synchronicity | 1 µs standard deviation |
| Data rate per sensor node | 1 MBit/s |
| Sensor nodes per system | 1 to 40 (typically: 10) |
| Range free field 802.11g | 138 m isotropic |
| Power Supply | interneral battery / power supply unit optionally (lower analog performance) |
| Measurement Period | typ. 7-9 h in battery mode |
| Battery Charge Time | Max. 3 h |
| Operation | 1 switch, or via driver software |
| Display | 4 LEDs (wireless or battery mode) |
| Dimensions | 40 x 40 x 82 mm³ (without antenna) |
| Weigth | 220 g |
| Protection Class | IP 67 |
| Storage | – |
| Measurement Trigger | – |
Accessories – Wireless, synchronous Vibration and Oscillation Measurement
Standard Accessory |
|
Plug-In Power Supply TDS-PS |
The Plug-In Power Supply TDS-PS serves as a charging unit and can be used for all TEDIASENS radio nodes. |  |
|
Access Point TDS-AP |
The standard access point for the TEDIASENS radio nodes has its power supply via USB. The data communication works via Ethernet network. |  |
|
Accelerometer TDS-ACC
|
Single-axis accelerometer with BNC connector for SN-X sensor nodes |  |
| Additional Battery
TDS-EAP |
The additional battery extends the operating time of the radio nodes by up to 9 hours. |
Mobile Equipment |
| Magnetic Base
TDS-MF |
Magnetic base for easy and fast mounting of SN-I radio nodes on or in machines with metallic measurement positions. |  |
| System Case
TDS-CASE |
The ELOVIS Transport Cases CASE, which is available in different sizes, are ideal for safe storage and transport of sensor components. |  |
Software |
| PC Software
TDS-GUI |
The TDS-GUI configuration and monitoring software is used to operate, display and store TDS measurement values on a PC, laptop or tablet computer. |   |
Wireless, synchronous Data Transmission Vibration and Oscillation Measurement
SN-X: Sensor Node External
– Radio node for connection of external sensors (3 IEPE channels)
SN-I: Sensor Node Internal
– Radio node with integrated 3-axis accelerometer
AP: Access Point
– Wireless LAN: 802.11g
PC communication
– ELOVIS GUI: graphical user interface – LabView based
Videos – Wireless Data Transmission Vibration and Osciallation Measurement Systems
| Product Video – TediaSens
Video regarding Wireless Data Transmission Vibration and Oscillation Measurement Systems Synchronous Wireless Measurement Data Transmission Product Tutorial and Application Overview |
 |
Downloads – Wireless Data Transmission Vibration and Osciallation Measurement
|
|
|
TEDIASENS SNI – Data Sheet |
APLICACIONES
Transferencia de datos de medición síncrona inalámbrica
¿Deben transmitirse los datos de medición de forma inalámbrica y sincrónica? ¿No encuentra un sistema inalámbrico suf...
Medición de vibración y oscilación
En la resolución de problemas, las mediciones de vibración deben llevarse a cabo rápida y fácilmente en diferentes pu...
Registro de datos de monitorización y medición a largo plazo
Los estados del objeto se deben supervisar durante un largo período de tiempo a intervalos regulares, por lo que los ...
EJEMPLOS DE APLICACIÓN
Monitorización inalambrica de maquinas
El servicio de máquinas requiere un equipo de medición confiable, que se puede usar de forma rápida y segura. Con lo...
Medición inalámbrica de vibraciones / oscilaciones en máquinas de papel
Debido a su tamaño y complejidad, las máquinas de papel son un desafío en la resolución de problemas de vibración. Co...
Prueba de impacto y medición de aceleración para cascos
Los cascos para el deporte y tráfico deben cumplir con altos requisitos de seguridad. El punto decisivo es el efecto...